2008/09 Resonator Delete
Resonator delete is a simple mod that many Bullitt owners have done. Instructions are below.
Parts Needed:
(2) Expand Tite 1 5/8" to 1 3/4" Expansion Plug
(2) 3/4" to 1 3/4" Hose Clamps
Parts Needed:
(2) Expand Tite 1 5/8" to 1 3/4" Expansion Plug
(2) 3/4" to 1 3/4" Hose Clamps
Step 1:
Remove Intake tube from throttle body and filter head.
Remove Intake tube from throttle body and filter head.
Step 2:
Remove factory hose clamps that secure the resonator to the intake tube. Discard after removing.
Remove factory hose clamps that secure the resonator to the intake tube. Discard after removing.
Step 3:
Place expansion plugs in holes, then tighten the nuts which expand the rubber. Then attach the hose clamps and tighten.
Place expansion plugs in holes, then tighten the nuts which expand the rubber. Then attach the hose clamps and tighten.
Step 4:
Re-attach Intake tube to TB and intake filter.
Re-attach Intake tube to TB and intake filter.
Notes:
Make sure you have all the parts before you start. The car will stall out if you attempt to start-up with resonator removed and the holes unplugged.
Make sure you have all the parts before you start. The car will stall out if you attempt to start-up with resonator removed and the holes unplugged.